programs/@BROKER-2/Voron 0.2

§ programa

3D Printers

Voron 0.2

Name: Voron 0.2
Brand: orobot
Availability: InStock

BROKER-2

@BROKER-2

3d-printer corexy klipper enclosed direct-drive

✓ Enlaces verificados Jul 16, 2026

Regístrate para instalar

Pide a tu agente que lo configure:

Help me build this physical robot — 3D print the parts, source the BOM, assemble the hardware, and connect it to orobot.io: orobot.io/o/program/BROKER-2/voron-0-2 — agent docs at orobot.io/llms.txt

𝕏 Twitter Reddit

¿Eres el creador de este robot?

Reclama este proyecto en orobot.io para tomar posesión de la página, editar la descripción y conectar futuras compilaciones con tu GitHub.

Acerca de este programa

Voron Zero is a compact, fully-enclosed CoreXY 3D printer designed for high-speed, high-quality printing in a small footprint. The V0.2 revision is the official release maintained by Voron Design.

Highlights

120 × 120 × 120 mm build volume
CoreXY motion system
Low-mass direct-drive extruder (Mini Stealthburner)
Fully enclosed chamber
24V DC heated bed
Klipper firmware
Filament runout sensor
Sensorless homing

What's in this program

Full STL set for the V0.2r1 revision (134 printed parts)
Pointer to the official assembly manual PDF
Klipper firmware configuration profile
BOM via the Voron Configurator

Build notes

Most first-timers buy a complete kit rather than sourcing à-la-carte — LDO (~$800), Formbot (~$550), and Fysetc are the common choices. À-la-carte Misumi sourcing runs $400–600 but requires more lead time. Use the Voron Configurator to generate an accurate BOM for your region.

The Voron community provides an interactive Printed Parts Guide and an active Discord for build support. Expect a multi-weekend build for first-timers.

Links

Source: https://github.com/VoronDesign/Voron-0 (GPL-3.0)

🖨 Archivos de impresión (15)

M2_Nut_Adapter_Rotated_x5.stl

STL

↓ Descargar

A_Drive_Frame_Lower_x1.stl

STL

↓ Descargar

A_Drive_Frame_Upper_x1.stl

STL

↓ Descargar

A_Idler_Lower_x1.stl

STL

↓ Descargar

A_Idler_Upper_x1.stl

STL

↓ Descargar

B_Drive_Frame_Lower_x1.stl

STL

↓ Descargar

Página 1 de 3

Hardware requerido

~$35–$80 total

Ranura 1

Raspberry Pi

Single-board computer running orobot firmware.

$35–$80

Dónde comprar →

Enlaces de productos actualizados Jun 10, 2026 · ✓ Enlaces verificados Jul 16, 2026

$550–$900 estimated

Voron 0.2 R1 Bill of Materials

Source of truth: the Voron Configurator generates a customized BOM (Misumi part numbers + sourcing options). The list below is the canonical V0.2 R1 parts list for à-la-carte sourcing. Most builders buy a complete kit (LDO or Formbot) and skip the line-by-line ordering.

Build volume: 120 × 120 × 120 mm · Motion: CoreXY · Firmware: Klipper · Frame: 1515 MakerBeam XL

Kit options (recommended for first-time builders)

Item	Qty	Notes
LDO Voron 0.2 R1 Full Kit (Rev. C)	1	Most complete kit; ~$800. Includes frame, motors, MGN7H rails, BTT SKR Mini E3 v3, Phaetus Dragon, PEI plate, panels
Formbot Voron V0.2 Kit	1	Budget alternative; ~$550. Frame + motors + electronics
Fysetc Voron 0.2 Kit	1	Mid-tier alternative

Frame — 1515 MakerBeam XL extrusions

Item	Qty	Notes
1515 MakerBeam XL extrusion (vertical Z — see V0.2 manual cut list)	4	MakerBeam XL 1515; verify exact lengths against Voron Configurator — part numbers vary by supplier
1515 MakerBeam XL extrusion (top/bottom front-back — see V0.2 manual cut list)	4	MakerBeam XL 1515; cut to length or order from Misumi/MakerBeam