Voron 0.2
B✓ Links überprüft Jul 16, 2026
Registrieren, um zu installierenÜber dieses Programm
Voron Zero is a compact, fully-enclosed CoreXY 3D printer designed for high-speed, high-quality printing in a small footprint. The V0.2 revision is the official release maintained by Voron Design.
Highlights
- 120 × 120 × 120 mm build volume
- CoreXY motion system
- Low-mass direct-drive extruder (Mini Stealthburner)
- Fully enclosed chamber
- 24V DC heated bed
- Klipper firmware
- Filament runout sensor
- Sensorless homing
What's in this program
- Full STL set for the V0.2r1 revision (134 printed parts)
- Pointer to the official assembly manual PDF
- Klipper firmware configuration profile
- BOM via the Voron Configurator
Build notes
Most first-timers buy a complete kit rather than sourcing à-la-carte — LDO (~$800), Formbot (~$550), and Fysetc are the common choices. À-la-carte Misumi sourcing runs $400–600 but requires more lead time. Use the Voron Configurator to generate an accurate BOM for your region.
The Voron community provides an interactive Printed Parts Guide and an active Discord for build support. Expect a multi-weekend build for first-timers.
Links
- Voron-0 GitHub (STLs + manual)
- Official Assembly Manual PDF
- Voron Configurator (authoritative BOM)
- Printed Parts Guide
- Voron Discord
- Klipper firmware docs
Source: https://github.com/VoronDesign/Voron-0 (GPL-3.0)
🖨 Druckdateien (15)
M2_Nut_Adapter_Rotated_x5.stl
A_Drive_Frame_Lower_x1.stl
A_Drive_Frame_Upper_x1.stl
A_Idler_Lower_x1.stl
A_Idler_Upper_x1.stl
B_Drive_Frame_Lower_x1.stl
B_Drive_Frame_Upper_x1.stl
B_Idler_Lower_x1.stl
B_Idler_Upper_x1.stl
Drag_Chain_Spacer_x1.stl
Front_Bed_Mount_x1.stl
Rear_Bed_Mount_Left_x1.stl
Benötigte Hardware
Voron 0.2 R1 Bill of Materials
Source of truth: the Voron Configurator generates a customized BOM (Misumi part numbers + sourcing options). The list below is the canonical V0.2 R1 parts list for à-la-carte sourcing. Most builders buy a complete kit (LDO or Formbot) and skip the line-by-line ordering.
Build volume: 120 × 120 × 120 mm · Motion: CoreXY · Firmware: Klipper · Frame: 1515 MakerBeam XL
Kit options (recommended for first-time builders)
| Item | Qty | Notes |
|---|---|---|
| LDO Voron 0.2 R1 Full Kit (Rev. C) | 1 | Most complete kit; ~$800. Includes frame, motors, MGN7H rails, BTT SKR Mini E3 v3, Phaetus Dragon, PEI plate, panels |
| Formbot Voron V0.2 Kit | 1 | Budget alternative; ~$550. Frame + motors + electronics |
| Fysetc Voron 0.2 Kit | 1 | Mid-tier alternative |
Frame — 1515 MakerBeam XL extrusions
| Item | Qty | Notes |
|---|---|---|
| 1515 MakerBeam XL extrusion (vertical Z — see V0.2 manual cut list) | 4 | MakerBeam XL 1515; verify exact lengths against Voron Configurator — part numbers vary by supplier |
| 1515 MakerBeam XL extrusion (top/bottom front-back — see V0.2 manual cut list) | 4 | MakerBeam XL 1515; cut to length or order from Misumi/MakerBeam |
Ähnliche Roboter entdecken